Global Giti
Commodity guides

Steel rebar: standards, sizes, certificates and routes

Steel rebar (deformed reinforcing bar) is produced to national standards that differ in grade names, ductility classes and sizes. The most common in Global Giti's markets are the British BS 4449, the American ASTM A615 and the interstate GOST 34028. This page covers specifications, certificates, documents and regional trade, based on sources published up to November 2026.

Published: Last reviewed: Information status:Current

HS codes

  • 7214.20 Bars and rods of iron or non-alloy steel, hot-rolled, with indentations, ribs, grooves or other deformations, or twisted after rolling (straight rebar)
  • 7213.10 Bars and rods, hot-rolled, in irregularly wound coils, with indentations, ribs, grooves or other deformations (rebar in coil)

Grades and specifications

  • BS 4449:2005+A3:2016 defines grades B500A, B500B and B500C, all with a characteristic yield strength of 500 MPa. Ductility rises from A to C: total elongation at maximum force is 2.5%, 5.0% and 7.5% respectively. Bending and scheduling follow BS 8666.
  • ASTM A615/A615M-25 covers deformed and plain carbon-steel bars in cut lengths and coils, with grades 40 [280], 60 [420], 80 [550] and 100 [690]; the largest deformed bar is No. 20 [64].
  • GOST 34028-2016, in force in Russia since 1 January 2019, covers reinforcing bar classes A240, A400, A500 and A600 (and higher classes for prestressed concrete). It replaced GOST 5781-82 and GOST 10884-94.

Packaging and shipping

  • Rebar is supplied as straight bars in cut lengths or in coils; ASTM A615 requires final products to be marked by a tag.
  • State the diameters, length, bundle weight and tagging in the contract.
  • Agree the transport mode and how bundles are secured and protected against corrosion during transport.

Quality testing and inspection

  • ASTM A615 requires tensile tests (tensile strength, yield strength, elongation), bend tests and deformation checks.
  • Under EN 10204 a type 3.1 inspection certificate reports specific test results approved by the manufacturer's inspection representative who is independent of production; type 3.2 is additionally approved by the buyer's representative or an inspector designated by regulation.
  • Ask for the heat number on each tag to match the mill test certificate.

Documents

  • Commercial invoice and packing list (bundles, diameters, lengths, weights).
  • Certificate of origin.
  • Bill of lading for sea; consignment note (CMR) for road; rail waybill for rail.
  • Mill test certificate (for example EN 10204 3.1 or 3.2) linked to heat numbers.
  • Check with the buyer's customs whether the destination applies trade-remedy or other import measures to steel.

Regional trade flows

Turkey is a major rebar exporter. According to Turkish Statistical Institute data reported by SteelOrbis, Turkey exported about 3.30 million tonnes of rebar in January–September 2026, up 9.0% year on year; the leading destinations were Yemen, Palestine, Peru, Egypt and Romania, with Georgia also among the top ten.

For Iran- or Russia-origin rebar, sanctions and export-control rules depend on the counterparty, product, bank and route and must be checked for each deal. This page is not legal advice.

Buyer checklist and common risks

  • Standard and grade: B500B, Grade 60 and A500C are different specifications; name the one your project requires.
  • Weight: agree whether invoicing is by actual (weighbridge) or theoretical weight, and the tolerance.
  • Traceability: tags, heat numbers and the mill certificate must match.
  • Condition: check for rust and bent bars on arrival.
  • Payment: on Global Giti the funds are held in escrow with a licensed saraf and released after delivery is confirmed.

Find cargo for this route on the marketplace

Real sale offers, escrow with a licensed saraf and carrier tenders — all in one place.

Open the marketplace
Customs & complianceHS codes, tariffs, permits, documents and restricted goods in 13 countries.

Other commodities

Sources

Prepared by the Global Giti research teamSources and method