Bitumen: grades, packaging, documents and routes
Paving bitumen is sold either by penetration grade (such as 60/70 or 85/100) or by viscosity grade (VG-10 to VG-40). The two systems measure different properties, so a contract must name the standard, the grade and the test methods. This page covers specifications, packaging, inspection, documents and the main regional trade flows, based on sources published up to November 2026.
Published: Last reviewed: Information status:Current
HS codes
- 2713.20 Petroleum bitumen
Grades and specifications
- ASTM D946 covers penetration-graded asphalt binder in five grades: 40–50, 60–70, 85–100, 120–150 and 200–300. Its requirements include penetration, ductility, flash point and solubility in trichloroethylene, and the binder must not foam when heated to application temperature.
- ASTM notes that these penetration ranges are legacy grades in North America, where they are now used mainly for roofing; viscosity-graded binders fall under ASTM D3381 and performance-graded binders under D6373 or D8239.
- The Indian standard IS 73:2013 classifies paving bitumen by absolute viscosity at 60 °C into VG-10, VG-20, VG-30 and VG-40 (minimum 800, 1,600, 2,400 and 3,200 poise). Its table also sets kinematic viscosity at 135 °C, flash point, solubility, penetration, softening point and tests on the residue after the thin-film oven test.
- Indian Oil states that VG-30 can be used in place of 60/70 penetration grade, VG-10 in place of 80/100 and VG-40 in place of 30/40. These are use equivalents, not identical specifications.
Packaging and shipping
Bitumen is traded in bulk and in packaged form (drums and bags). In Argus reporting on Iranian exports in June 2021, bulk cargoes went to the UAE, India, Oman, China, Pakistan and Armenia, while drummed and bagged product went to a wider set of buyers that included India, the UAE, Bangladesh, Kenya, Tanzania, Malaysia, Indonesia, Afghanistan and China.
- Agree the packaging type, net weight per unit and the number of units per container or truck in the contract.
- For bulk cargo, confirm that the loading and discharge terminals can receive the product before fixing the vessel.
- For inland destinations such as Afghanistan or Central Asia, packaged bitumen can continue by road or rail after discharge; write the transfer point and who bears handling costs into the contract.
Quality testing and inspection
- Ask for a certificate of analysis that lists each property, the limit, the test method and the result for the grade and standard named in the contract.
- Independent inspection companies such as Bureau Veritas offer asphalt and bitumen testing and petroleum cargo inspection; Bureau Veritas states that its laboratories hold ISO 17025 accreditation.
- Agree in advance which laboratory's result is final if the load-port and discharge-port results differ.
Documents
- Commercial invoice: the seller's bill to the buyer, used by customs to assess duties.
- Packing list: number of drums or bags, weights and marks; it supports but does not replace the invoice.
- Certificate of origin, often validated by a chamber of commerce.
- Bill of lading for sea freight; for road and rail, the corresponding consignment note (CMR) or rail waybill.
- Certificate of analysis or quality and, where agreed, an independent inspection certificate. Some destinations require further special documents, and some products need pre-shipment inspection.
Regional trade flows
Iran is a key bitumen supplier to India. Argus reported in August 2026 that India's bitumen imports in the first half of 2026 fell by about half year on year, because Iranian exports were hit by the conflict and the de facto closure of the Strait of Hormuz from March, and a US naval blockade left many vessels stranded in the Gulf. Argus expected imports to stay subdued in July and August as owners were reluctant to load from Iran.
For Iran-origin bitumen, sanctions and export-control rules depend on the counterparty, product, bank and route and must be checked for each deal. This page is not legal advice.
Buyer checklist and common risks
- Grade mismatch: "60/70" and "VG-30" are not the same specification. Name the standard (for example ASTM D946 or IS 73) and the edition.
- Weight: agree whether the price is per net or gross tonne, and how drum or bag tare is treated.
- Quality disputes: fix the sampling point, the laboratory and the tolerance before loading.
- Logistics: in 2026 Gulf shipping has been disrupted; allow for delays and agree who bears demurrage.
- Payment: on Global Giti the funds are held in escrow with a licensed saraf and released after delivery is confirmed.